Probes and Electrodes
Hach Company Electrode Cleaning Solution for Minerals/Inorganic Samples, 500 mL
Electrode cleaning solution to remove mineral contaminations/deposits from pH sensing element. 500 mL bottle.
Cole-Parmer Oakton Conductivity Probe, 2-Cell, 8-Pin; K=10
If your conductivity measurements are off, you might need a new cell, sensor, or calibration kit. Update, upgrade, or replace to get the best out of your Oakton conductivity, resistivity, or TDS meter.
Cole-Parmer Oakton Electrode pH All-in-one SJ with ATC for 600 Series Meters
Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample.
Oakton by Cole-Parmer Ion-Selective Electrode (ISE), Surfactant, Double-Junction, BNC
These fast and accurate electrodes do not require an external referencethey're easier to use than separate sensing and reference half-cell electrodes. As double-junction combination ion-selective electrodes, they are convenient to use in places where two electrodes won't fit. All electrodes include a 30-mL bottle of reference solution, a reference filling pipette, 1-m cable, BNC connector, and an instruction manual. Use electrodes with a meter that has a resolution of 0.1 mV for the most accurate results.
Cole-Parmer Oakton Ion Selective Electrode (ISE), Double-Junction, Epoxy; Silver/Sulfide
A wide variety of ion selective electrodes are availabe to suit a wide array of applications. Select from four electrode types: membrane, solid-state, gas sensing, and glass bulb; typical response time is 20 to 30 seconds. Epoxy-body ISEs are either single- or double-junction, and the glass-body type is double junction.
Cole-Parmer Oakton Single-junction, semi-dome, polygel reference, temperature sensor w/ waterproof connection (Anthony) pH electrode, 100C, 12 mm x 115mm,30K ATC.
Replace electrodes when they break, no longer hold calibration, cannot be rehydrated, or are not compatible with your sample.
Cole-Parmer Oakton ORP electrode; double-junction, BNC Connector
The Ag/AgCl combination reference electrodes have an impact-resistant epoxy body. Electrodes provide a fast, stable response and are ideal for prolonged readings. Gel-filled design requires virtually no maintenance. 127 mm L x 12 mm diameter with maximum 176F (80C) temperature.